The tone / notes are mixed with the drums together and amplified, put through the speaker. Before that you can grab them from pin 12 (voice) and 13(drums). There might be an envelope channel on pin 11 - at least that;s what was said in one of the very well produced "keen on keys" videos.
D1867G based keyboard hacks | Adding an octave switch
2020-12-17 22:31:55
This is 3 pictures of the PCB of a VL-Tone VL-1 patched together to one. After a shoutout on twitter people were taking apart their VL-1s for me and took pictures, what a great thing! The main connections for the switch are on the bottom.
The PT-10 that I own has the same chip in the same case, so I wanted to see if I can add something to the keyboard, that wasn't there before. Wait, did I hack something?
Counting from the bottom left, pin 8, 9 and 10 are the octave switches, connected through a diode and a 3 way switch to the very last pin. You (sadly) have to cut where the unicorn is pointing to, but it's reversible if you really need to do that.
Next up should be tracing the ADSR switch, to get a new instrument out of it. At one point I need to see if I can connect an LED display to replace the LCD.
LAMEBOY - another ESP12 handheld | Deauther ordeal
2020-08-24 21:12:14
I finally found my 2017 modified version of the deauther and added it to the download section. Use at own risk, don't come to me or Spacehuhn for advice. This is as is. Use it on your own tech only. Don't make people hate you because you want to "jam" your neighbors. Be nice and responsible.
Proud of the added "scan" for the button IO expander, as I've used different versions with different addresses over time.
THT feather with ATMEGA8 | reset mod by @danjovic
2020-08-18 09:35:45
I've added a modification by @danjovic to the download section. It adds a reset button to the updated schematics. I still haven't come around to actually test my own board, but the first version was already verified by someone else on twitter.
THT feather with ATMEGA8 | Boards are in and a small surprise
2020-05-24 22:16:50
Thanks to OSHPark the boards got here quickly, but I'm still waiting on some parts like the regulator, to populate the PCBs. I noticed that one of the resistors seems unnecessary, I've copied it in from the 5V design and forgot to remove that. Maybe I'll put a pull-up resistor on the reset pin in its place - although I do believe there's an internal pull-up resistor anyways, albeit weak.
Someone managed to order and build this project before I even had the chance to solder something together! Turns out there was a minor mistake in the design where two ground plane fills were separated. The V-USB firmware is reported to enumerate - yay :)
Not sure what has happened when I soldered the boards, but I never really got them to work properly. I just spend an hour on reworking and cleaning a board, but I've must have killed the chip doing that. Before it was accepting the bootloader, but now both boards are completely gone.
One spare board from the first batch is missing the chip and I'm considering to remove everything what's on there, cleaning all the pads and try everything with a low temp solder paste and new parts. It still bugs me that everything is running off of the battery voltage on the arduboy.
Or I'll just slap a known Atmega32u4 board on there and call it a day.
zynthia - sequencer synthesizer | more expansion ideas
2020-02-24 15:18:05
I was watching a review of a modern sequencer and saw it going back and forwards. Thought to myself I could maybe connect the "overflow" pin of the 4029 and the forwards / backwards selection with a 4017 / 4022 chip. Need to investigate that :D
Club Matrix | Not The Final Countdown
2020-02-17 11:55:42
We had an event with short talks at the xHain Hackerspace recently and we wanted to use the club matrix as a timer for the presenter. I have yet to write a font generator and a script to do that though and the only thing I can kind of reliably do is playing a video. The sane solution: search on youtube for a 15min countdown video, which kind of worked.
But since we were at the hackerspace, one member wanted to try to let ffmpeg generate the countdown. The first version of the script by Niklas was almost perfect, but used a PNG as a background image. Then another member (danimo) took a look and removed the background image and let ffmpeg turn the background from green to red in the last minute.
After activation of linear advance with .4 nozzle:
M900
Advance K=0.50
looking back to 2019 and forward to 2020
2020-01-05 19:01:48
2019 Bigger Projects
#Club Matrix Array of 10 8x8 WS2812B LED matrices, controlled by a Raspberry PI through a DMA library. Images can be send as UDP packages to the matrix, if you happen to know the IP address.
SX-64 inspired Raspberry PI case Inspired by portable computers from the 80ies, I started to build a case around a Raspberry PI with 10mm extrusion profiles and lasercut panels to mount stuff to. https://www.youtube.com/watch?v=vXGr7-_U_tY
#400 LED XY oscilloscope For another video done for "elemen14presents", I cobbled together schematics out of Forrest Mims III's engineers notebook to make an LED oscilloscope that has 20 x 20 10mm LEDs.
#LED handheld This monster pixel game uses some tricks like charlieplexing, soldering LEDs upside-down to shine through the PCBs and hours of sanding on a 3D printed case.
plenty other projects for element14presents Here's a list of all my appearances as a video host for element14presents, plus some extra episodes of livestreams of the makercast - podcast that me and some other youtubers started. https://www.youtube.com/playlist?list=PLN5aOBKmcf5-954RyDwuX6KYXCDLIr4BO
zynthia - sequencer synthesizer | New DIP version
2020-01-03 20:34:12
I've been asked for a DIP version and this is basically the latest SMD version with swapped parts and a bigger PCB. Ordered at JLCPCB in red.