all years
202620242023202220212020201920182017201620152014
2211152313307215210213462
newer 4 / 6 older

planning winter projects and stuff

2016-09-23 22:06:58

While working long hours wishing for some time to tinker again, I was shopping a lot of stuff the last two or three months. So once again I will compile a list of projects I might tackle in the future. This list is also for me because I forget things I have.


MQTT stuff

First up is the world clock with plenty of 1602 Displays I've ordered recently. Then there is this 5m red LED strip that I plan to control via a 'redAlert' command over MQTT. A wheather station would be nice too and some logging on the PI, although I'm still skeptical on logging stuff on the same SD card where the OS is. With the 4 relay module from eBay I want to see if I can hook it up to an ESP8266 despite the relais being 5V, probably yes.


Raspberry PI media recorder / alexa

4 USB microphones and 4 USB soundcards were supposed to help me get alexa running on a PI zero or record 4 input lines simultaneously with the help of JACK (I've done that before with linux)


Raspberry PI zero handheld

Most of the time when I think of what I would have wanted to do with my Game Boy, this Idea pops up, where I use it as a remote or surf the Internet - having a cartridge with embedded WIFI in it. This would mean programming something to program the Game Boy / running a client from a ROM that also pulls stuff from the internet etc. Way too complicated, so I will try to hack up a thing similar to Ben Hecks Raspberry PI Zero Portable Computer. Soon my third pi zero will arrive here, so it's time to throw one into something. Some empty Game Boy Advance shells for under 5 Euros found their way to my place, too. Still thinking about the im-me messenger so I have to throw in a radio module at least.


ST-Link stuff

10 of those cheap STM8 boards are already here and I'm waiting for the ST-Link adapter to finally try out @WooDWorkeR s tutorial on them [https://hackaday.io/page/2128-the-070-stm8-board]. Scrolling through my eBay purchases I also found the cheap STM32 boards.


Other stuff

A MAN2A / TIL305 watch comes to mind, a cheap click tracker converted to a frequency counter, a mobile color TV converted to a PI display, arduino VGA ported to ESP8266 (out of skills?), maybe some analog stuff again. Man my lightsaber needs some work too, like most of my projects.


Cons and Faires

MakerFaire Berlin and 33c3 are the next cons I'm planning to visit, sadly no Hackaday super conference this year for me.


Work related

I've designed my biggest board yet recently, basically an Arduino pro micro shield :D but with RJ45 connectors for RFid modules and a display. There are also optocouplers and an ENC28J60 is on there. It's 10x10 cm's, I've cheated with vias to get terminal screws outside of the 8x10cm eagle restriction and overall I'm pretty happy with it.

Me building projects from hackaday.io | #RPi WiFi Hat - by @ajlitt (PART 2:FAILFIGHTING)

2016-08-28 20:24:19

#RPi WiFi Hat - by @ajlitt

so I finally came around the other day to try out the boards I've done in Part 1 and follow the detailed instructions https://hackaday.io/project/8678/instructions


As suggested, I also followed the OTG tutorial to control it over just one usb cable from my usb3 port. awesome.


So here it is - PROTIP: don't make shields like that! I tried to debug it for a whole while until I noticed that I had it put in backwards. Now I'm able to ssh via USB into a raspberry and scan for SSIDs and stuff. Nice.




Heimdall - dumb remote home | for the future

2016-08-19 22:05:46

Installation of alexa services on a pi zero. Alexa is IFTTT compatible and so is mqtt?

https://github.com/amzn/alexa-avs-raspberry-pi

http://frederickvandenbosch.be/?p=1701

https://www.hackster.io/devicehub-net/do-button-from-ifttt-home-automation-example-494a1a

I'm a fan of your fan | mqtt for the win

2016-08-07 00:44:11

I recently played around with mqtt again and used one of my #Ignore this ESP8266 board -s to internet-of-thingify this fan construct. Searching for reasons why the uln2004 wouldn't work with 3.3V I tried pnps and npns until I found that I haven't declared the pins I was using as an output. I might have also connected the 12V with the 3.3V line while experimenting :D but in the end it turned out that I had also connected the fans backwards. Muah. But now it runs and I can control it via MQTT.fx - winning.

The ESP arduino soft PWM runs at 1kHz and I can hear it, that is kind of annoying.

Don't forget to set different clientIDs ;)

Johnny IV | ws2812b connection boards

2016-07-15 18:49:44

I recently got a coupon for OSHpark and now that work finally cooled down and I also had some boards to do for work, I made a little connection board for ws2812b stuff. This board is basically what I did in my other project #RGB 16 Segment LED, the arduino/USB hub wouldn't power the LEDs, but when the external power bank was connected it would. A big cap holds some juice and the resistor is for protection.

Here is the basic protoboard version I'm too lazy to solder evereytime :D


Recycled LiPo Powerbank / PSU | Cheap eBay power bank cases - 2 cells

2016-06-27 20:19:05

for recycling old notebook LiPo cells, mainly 18650s, I've bought some of those BYOB (bring your own batteries) banks from eBay. I also tried to research how one gets to know the internal resistance of a battery.


So If I understood correctly I'll get the internal resistance by measuring the battery voltage with and without a known load and use the following formula:


The batteries I'm using are sanyo ur18650F, typical Capacity is 2600mAh and charging current is 1.75A per cell. That's way more the powerbank is able to deliver, as it seems. Input is rated 1A. So what happens if it can't deliver more?

http://www.batteryonestop.com/baotongusa/products/datasheets/li-ion/sanyo-ur18650f-26a.pdf

Hackers Hoodie | steppers are in

2016-06-25 19:45:20

[+video]

nobody want's to hear me crying about how much work I had to do for the past months, so here's what happened today. I've smuggled a little print onto the 50 hours to 3Dprint list.

Those steppers are way to weak for the hoodie :( I need to gear up or get some beefy servos.


This [german] fellow has figured out the setup for this specific stepper configuration.

https://blog.thesen.eu/es-geht-doch-schrittmotor-28byj-48-mit-der-original-arduino-stepper-library/

Fixietube - Fake Nixie Tube displays | 5x5cm2 boards

2016-06-17 09:58:41

Since the the socket fits a 5x5 dirtypcb board perfectly and the cabling job was kind of annoying, I thought of also revisiting the base design. Maybe I'll fit an esp8266 on it as well. Maybe not.


Fixietube - Fake Nixie Tube displays | Definitely better viewing angles

2016-06-14 18:14:22

So while I was in Austria for an installation the 3mm diffuse LEDs came in and I had to solder one of the left over boards together. The blue LEDs might need a diffuser as well andI still want them to turn off at night. Actually I could just fix that right now in software.

Magnet on a string | Expansion plans - give me you MacGyver tools (or links(or take me to your leader))

2016-06-12 10:22:53

I'm currently in Austria because of work. I love this place, but there's no place like home, where you have EVERYTHING you need, when you need it. So I'm thinking of a kit that allows you to have some options to go through, with little parts. This list might be updated at anytime.

You always need a paper clip for something. Maybe it's a temporary hook, or something to poke a reset button or to release a dvd from it's evil drive.

A rubber band?

Fixietube - Fake Nixie Tube displays | additional thoughts on progressing

2016-05-27 12:29:09

This project collected some dust for a while, but now with a dedicated spot on my table, I want to give it some thoughts and love, starting with some different LEDs. I've ordered diffuse orange LEDs and I will try them out on a spare board, testing if this will increase the readability. I'm close to putting an ESP8266 in there and play around with the "program over air" code or connect it via serial to my Raspberry PI. I like the thought of working on it without taking it apart to get to a serial/usb thing on there.

Open Bicycle Computer | Restart - the bike building log

2016-05-07 18:16:47

In the old hacker fashion I decided to repair the wheel and the treadle myself. A whole new world with a whole new lingo opened up to me today, thanks to youtube. So far I've only managed to rip off the thread of the back-wheel rod, everything else looks still intact. I'm a bit late for this years cycling season, but it's immanent for my health and well being, that this thing rolls again. Tomorrow I'll try to recut the thread on the rod and the day after I'll receive some special tools for repairing bikes. The cost was about half of a home improvement store bike, but I want to learn this stuff and see if I can fix it by myself.

Hackers Hoodie | Design concepts for the hood

2016-04-25 17:04:14

Hackers Hoodie | Challenges

2016-04-23 15:58:00

MiDi Drum machine | Looking for help : squishing sensors

2016-04-21 19:56:30

does anybody know what terms I could google? I need some mechanical squishing / squeezing / maybe slapping translated into at least HIGH LOW, so basically a switch, but better something analog.

Maybe I could use some selfmade tilt switches joined with interrupts.

PLoS - Project List of Shame

2016-04-20 13:54:25

another trial in youtube video production

2016-04-16 17:52:27

It took me 23 takes to finally write down the text... but here is the result. Recorded, edited and dubbed with my Android phone.


5 diode train brake

2016-04-13 18:24:34

So when my dad told me that the 5 diodes on a pcb were going for 15 to 18 Euros on eBay I thought to myself - why don't I try that too :D thanks to eBay and PCBs from dirtypcbs.com I'm at a material cost of 50ct or so. On sunday I'll test them.

Me building projects from hackaday.io | Tote Had by Radomir Dopieralski

2016-04-02 11:42:59

#Tote HaD by @Radomir Dopieralski

So I've ordered the boards and servos and already soldered a bit, although my free time is rare these months, but I wanted to bring my Tote with me to #Hackaday | Belgrade and code for it a bit. The simplicity of the #Tote is something I really liked and I never had a walking robot before, so this was a thing about to happen. Having a 3D printer at home and loving designing 3D parts I wanted some sturdier looking legs and took some basic servo mounts I designed earlier for #Johnny IV

As soon as the parts are all printed, I will update this post.



ESP8266 board with classic Arduino footprint | ToDo

2016-03-29 23:39:44
newer 4 / 6 older