all years
202620242023202220212020201920182017201620152014
2211152313307215210213462
newer 3 / 8 older

PORG | weird head mechanics

2017-09-17 00:20:43

I'm trying to replicate the head behaviour of the "my keepon", as seen here [https://hackaday.com/2009/10/29/keepon-eat-your-heart-out/] and so I try to 3D print something that might work. I can't make out if the servos are connected in a 90 or 180 degree angle, so I've added 4 screw holes. These are two parts, printed into each other with a distance of 0.5mm - let's hope that's enough room.

I googled it further and found out that I basically want a swashplate (that's my google term) - with that I'll get an awesome range for shoulders and head! Just imagine the head with some oled eyes and the shoulders attached to this part and I'm almost done. Well, not really. Not at all. The amount of servos used is 3, so like a delta bot basically. Not sure if the shaft has to be fixed or also on a ball joint. 

zynthia - sequencer synthesizer | More Zynthias being build

2017-09-16 18:45:06

There will be updates, but here's a sneak peek for @al1  s version:

https://hackaday.io/project/9038-me-buildingusing-other-peoples-ideasprojects/log/67240-6-zynthia

LAMEBOY - another ESP12 handheld | quick fix for the regulator

2017-09-12 14:17:16

Since the AMS1117 regulator is not the best when it comes to the dropout voltage, I've made a little add on board, that will hopefully let me add the AP2112 regulator instead. They can be found on many adafruit boards, so I took that instead. I've ordered 12 boards, but the I'm still ashamed of what I "paid" and the board size :D

 

LAMEBOY - another ESP12 handheld | a *slightly* redesigned PCB

2017-09-12 08:38:36

Yesterday I've received my beautiful OSHPark boards and started to solder with the help of the stencil I got from OSHstencil.com. Sadly I've noticed that the crystal I got is the wrong size and I need to touch up some connections (pins are shorted at the power muxing chip etc.) I also need to solder the front side, meaning buttons and RGB LEDs. 

Some thoughts about the parts used led me to change some footprints or completely  swap parts. Already a lot of work to do again, but hopefully this way production might be easier and is not dependent on getting parts on ebay for cheap, but having them available on large amounts on digikey and mouser etc.

how to: Maker Faire | Demo Mode

2017-09-04 14:58:41

Laser cut faceplate, 3D printed case, two buttons and stereo 3.5mm plugs - for single and dual switching stuff :) this is definitely better than the cardboard box I had before! I'll add some demo functions and plugs to projects to show them off at the Zurich MakerFaire 2017 this weekend.

LAMEBOY - another ESP12 handheld | Assistive Technology Judges

2017-09-04 11:20:28

please ignore this, was too early for anything goes!

K.I.T.T. - KNIGHT RIDER badge/brooch | someone got lucky today

2017-09-01 16:35:57

So guess how many boards I got in my 10+ proto order at dirtypcbs? 40 pcbs! I have to stock up all the parts now :D

LAMEBOY - another ESP12 handheld | Hackaday API

2017-08-31 23:22:03

I've played around with the #Hackaday API to show me my likes. Yes, I'm one of those guys - I even noticed that it isn't the same like you can see on my profile page, since there the page likes are calculated in as well (bug is reported though).

At first I tried ArduinoJSON to extract the data, but then returned to char arrays and some brain-fu. Well some Strings are in as well, so it's not beautiful but get's results!

const char* skw = "skulls\":";
  int counter = 0;
  while (
    client.available() &&
    counter != 8
  ) {
    char json = client.read();
    if (json == skw[counter])
    {
      counter++;
    }
    else counter=0;
  }
  String skulls = client.readStringUntil(',');

LAMEBOY - another ESP12 handheld | game concept idea

2017-08-28 18:53:46

there's an invertDisplay function for the display, if you can find a version of the library that works on ESP8266 and you pipe in some lines of code... not the point now. The concept is inspired by stranger things, you have to get through a world and run into obstacles. You can only get through certain worlds by changing to the upside-down world (meaning invertDisplay) but there is that creature that closes in on you when you move, so you can't stay long on the other side.

video recap of #mfh17

2017-08-27 16:45:54

Maker Faire Hannover 2017 - fun times!

USB cable tester | yay :)

2017-08-26 07:59:34

so cool to see one in the wild!

LAMEBOY - another ESP12 handheld | Prototyped keyboard + display

2017-08-24 23:59:27

Thanks to @Radomir Dopieralski  I've soldered up a semi prototype. LCD and keys work :) that makes everything on I2C and SPI pretty much work as well.

LAMEBOY - another ESP12 handheld | back home

2017-08-23 09:52:00

Parts are ordered, some of them over eBay, some of them "locally" at voelkner.de - they're basically conrad.de but with a different pricing ethos and a flatrate for shipping. The almost most expensive part I've ordered there, the TPS2113A for power muxing. Boards are ordered at @oshpark as well and with a little help they might be here even sooner :) Also, first time order at https://www.oshstencils.com/


LAMEBOY - another ESP12 handheld | added SD card slot and C button

2017-08-20 23:26:18

For that I had to move and rewire some stuff, the I2C grove connector now sits on the other side. The SD card found it's place close to the LCD connections and I was able to use the last pin of the ESP for CS of the SD card. Some labels had to be moved as well. The extra C button is more of a troubleshoot / bootloader thing for Gamebuino, but I've added it as some kind of shoulder button anyways. I thought it would make sense to have that SD card and button for supporting the gamebuino games. They won't work with pre-compiled hex files over SD card, since they are compiled for atmega328 chips, but some of them should be easy to install with the Arduino IDE.


I'm not sure why, but at some point I've decided to place the display upside down :D Since they're using adafruit libraries I'll still be able to rotate the display. Nice.


Nice. Last input on the PCF8574 is connected to the SD card connect detection switch pin. Totally overlooked that before. Pretty cool to actually wait and further design the board, instead of rushing orders.


LAMEBOY - another ESP12 handheld | inspirational projects / adaptable platforms

2017-08-20 15:39:35

https://iamzxlee.wordpress.com/2014/04/16/2048-on-arduino/ - why not make a fibonacci number version of it :D

http://gamebuino.com/wiki/index.php?title=Getting_started

http://gamebuino.com/wiki/index.php?title=Games they seem to be shared by hexes for the atmega328 to read, but there's also arduino code that I could compile. nice. I've added a C button to my design.

Seems like https://www.kickstarter.com/projects/albertgajsak/makerbuino-a-diy-game-console is a module based clone of a gamebuino.

https://github.com/tobiasbu/marduino

https://hackaday.io/project/3981-flappy-bird-on-arduino

stranger things badge | pretty neat idea from comments

2017-08-19 22:13:00

https://playground.arduino.cc/Code/ADCTouch

thanks @Clayton G. Hobbs , I'll look into that :)

stranger things badge | so it begins

2017-08-19 11:34:08

I've made some screenshots to get started, to anyone interested: watch episode 3 of season 1 to get colors and fonts and wallpaper colors!

hacking a smoke detector | parts considerations

2017-08-19 11:23:00

http://www.ti.com/lit/ds/symlink/tpl5111.pdf 35nA thing that controls pwr converter and shutdown via gpio. only works with up to 5v though, not nine volt battery. so minimal power conversion still would be necessary.

LAMEBOY - another ESP12 handheld | what's next

2017-08-18 01:24:33

This needs a generally tested, breadboarded prototype, or at least it should. I've added 2.2mm drill holes where I could for later case designs to screw on, but I'm not sure about them. A beast to layout and probably more to solder! Seems to make sense to get a stencil for the first time.

LAMEBOY - another ESP12 handheld | PCF8574 - wait what?

2017-08-16 00:52:16

Although I had my run on some designs using this chip, I had to check the datasheet again and noticed something weird. Everyones project I've seen just uses a button that pulls the pin to ground. But what can we observe here on P5? A pull-up resistor of 100kOhms pulls up the input, until  you push a switch that connects it to even more pull-ups? I should sleep and tomorrow remove my pull-up stuff from the board. 

https://www.mikrocontroller.net/articles/Port-Expander_PCF8574

#D1 Mini X-Pad Shield 

#HariFun#133 More I/O Madness 

#Portable Raspberry PI Zero 

newer 3 / 8 older