all years
202620242023202220212020201920182017201620152014
2211152313307215210213462
newer 3 / 4 older

Locomatrix - 3D POV - a different approach | oh dear - i need to research

2014-06-08 22:43:54

So the motor was definitely the wrong choice. Or may be not the best for a directly driven gear. I have to come up with a gearbox, speeding down a beefier motor to make it work. The arduino was underfed with power when the motor turned so there was no way to get a satisfying light show :( I'm going to replace the arduino with an attiny45 later, but it was easier to get started with this setup. For the time it moved, there was almost no friction on the 3D printed parts. Any Ideas?

Here is a video of it not moving but glowing, a sonic screwdriver and me saying "crap".

Locomatrix - 3D POV - a different approach | first motion test (no leds)

2014-06-07 00:18:38

I could not resist to put the printed parts together! This is my test rig, I intend to build a fancy looking one but not for now.

Locomatrix - 3D POV - a different approach | my boss is awesome

2014-06-02 09:50:11

and this is why, already on the way:

Locomatrix - 3D POV - a different approach | had to rebuilt the 3D files

2014-06-01 20:38:21

turned out that my files could not be exported or reopened and I had to rebuilt everything. I'm gonna send the files to my boss and he will hopefully print them and send it to me by the end of the week. 

Sonic Screwdriver | POV based LED menu part 2

2014-06-01 19:35:34

So I got my motor driver for my scorcher6x6 and placed a 5led bargraph on it to test my POV algorhythms - works :)

future projects

2014-05-22 17:54:13

Flying keyfob

I still have a keyfob camera laying around and always wanted to make it fly. I frankensteined it to make time lapse pictures like a "drop and shoot for hours or days or years" device. would be cool to see it fly from my 18-floor house I live in, using some cellphone wideangle lenses I have to dig out.

Bicycle PC 

kind of embarrassing with all that tinkering I never made an arduino based bicycle pc. would be great to store your tracks and times on an SD card and it's just measuring the time between "clicks" from the reed switch. I may have an easy way to interface it with the web without hurdling around with apps, bluetooth and stuff but still be connected to your mobile one direction. All in all a bicycle pc nowadays should not stop there. It should be integrated with it's own power supply, be loaded by you through pedals, control the lights using light sensors and delayed off switching when waiting on a traffic light. It should be working without your cell phone, but even better with it.

Scorcher 6x6 

Found my rc car from the 90ies on ebay without any remote. I've already ordered a big motor bridge for the 2 500mA motors and a new battery and probably throw in an arduino with a bluetooth module and recreate the larsson scanner like seen here. There are some parts broken that I have to print in 3D, like a front wheel.


emiglio / emilio

I found it once on ebay and got it for around 10bugs. It's huge! I stripped the electronics from the head to replace it and the 2 shells of the head are fitting my head like a helmet (that's not easy - biiiig head). The gears are broken and I have to make a copy, probably make a silicone mold and cast it in resin, but thats two things i've never done before. I hope to throw in a raspberry pi in there or use my prize from the contest I won on hackaday once (a fubarino). I also found 4 PIR sensors in the garbage, still working (they were black and the house owner wanted white ones I guess) - saved me 20bugs.


solar turtle bot

I want to work with solar cells and 2-3 servos creating a little walking bot that seeks light and stays there and if the light is out it will retract its limbs and head.

tree climbing bot

I'm not sure whether it will jump from branch to branch or use some grappling hooks and other cool stuff... like pretending to be a spider. 


R2D2

I'm ashamed to say that until this year I had almost nothing related to star wars laying around. Since may the 4th there is now a $0 lightsaber built and my project from the ewok movies. 

LED matrix stuff

I ordered so many led matrices I wanted to use for clock projects or just liked their form factor so much... I got them in 8x8 and 5x7 in different colors and sizes. This is a stargate atlantis hommage.

Locomatrix - 3D POV - a different approach | a different, different approach

2014-05-22 14:55:40

So watching the video from the last log, I noticed one mechanism, which seems perfect for my needs. The velocity is almost constant and so I took the time, made some screenshots and started inkscape. Since today is almost friday, 123d design wasn't able to function the way it supposed and i had to export the imported svg file offline to .stl and get it online again and well.... I got to get back to the files soon. The teeth of my gear aren't right, but I'm going to 3D print it and tweak it anyways. I guess no timing is need but I will probably make a locomotive thingy, too. Hopefully I can print the parts during the next week and come up with a frame until then.

Locomatrix - 3D POV - a different approach | Inspirations

2014-05-20 15:58:57

This is just mezmerizing! There are some movements my project could benefit from..

Locomatrix - 3D POV - a different approach | Timings

2014-05-20 14:13:52

So in order to achieve a synced and not distorted picture, the timing for one 3D frame has to be like the following table, instead of a factor of 0.125.

I probably end up measuring the time of 2 frames, when it retracts to the electronics side, so I have to keep that in mind. 

And wow... I had to make a screenshot of the table because it looked really bad here on projects..

Sonic Screwdriver | looking for the right sound

2014-05-18 23:05:34

I'm trying to get the sound right and this will be my link store.

http://www.physicsforums.com/showthread.php?t=682430

Sonic Screwdriver | stuff ordered and future designs

2014-05-17 18:29:18

Not happy with the warm-white LED and its brightness, I ordered some 40.000mcd LEDs along the BPW34 photodiode for gamma-ray detection, a shorter potentiometer and some extra long pin headers. I previously design the LED board with 123D circuits but want to train/force myself into eagle and use OSH Park directly (saving the fee comes in handy, too). My first board will be an attiny85 pcb for a charlieplexed 5 LED bargraph which I intend to control over IIC or soft-serial. I hope I will be able to solder those smd parts and not connect the via on Resistor 3 with both poles. 

Sonic Screwdriver | pcb layout - finally figured out

2014-05-15 11:29:37

so I never really figured out until now, how i would want to place so many parts on the board, but this picture might describe best, what I'm up to or will be.

Sonic Screwdriver | POV based LED menu

2014-05-14 13:19:04

I just had a great idea, how I could show in which menu state I am. I will use a 5 LED bar graph showing some stuff like transmitting channels, but this can also be used as a 5 LED POV display as well! This will automatically lead to wildly move around with my sonic, so this seems pretty authentic as well ;) 

Sonic Screwdriver | taking stock and charlie-plexed bargraph

2014-05-12 00:37:00

So I checked my box with all the materials I gathered so far, and it seems I could easily build 2-3 of the same functionality. 

I also designed a charlie-plexed pcb for the 5 led bargraph so it only needs 3pins, as I won't have that much free anymore. The circuit can be found here. http://123d.circuits.io/circuits/204380-5led-bargraph-charlieplex

Sonic Screwdriver | LED PCB Design

2014-05-08 00:04:45

Fiddling with three LEDs with 10 legs total can be frustrating and leads to virtuos deadbug designs - resistors not even included, so today I took some time to design this pcb. The next design will be a board with an ULN2003A on, to drive the LEDs and an input board with three buttons and resistors, maybe in a sandwich methode, buttons on the upper side, driver on the bottom.

http://123d.circuits.io/circuits/210998-sonic-screwdriver-dome

Solarlamp Project Idea

2014-05-03 19:30:12

I just figured, that it would be cool to have some solar lamps that would get red if the soil moisture is too low. 

Some links for later:

http://www.cheapvegetablegardener.com/how-to-make-cheap-soil-moisture-sensor/

http://wemakethings.net/chirp/

Sonic Screwdriver | Photodiode Gamma Ray Detection

2014-05-01 23:28:54

While searching for darlington arrays I found an interesting german page about a gamma ray detector using a photodiode and an darlington circuit. I still have one channel free on my LED driving IC and the used diode is not expensive.

http://www.b-kainka.de/bastel131.html

http://www.elektronik-labor.de/Projekte/Alpha.html

https://www.sparkfun.com/datasheets/Prototyping/Solar/bpw34.pdf

Sonic Screwdriver | Combining inputs and outputs

2014-04-29 20:04:57

This is a table with some possible combinations for the sonic screwdriver.

Menuinputoutputcombination result
DAZZrgb led, white ledRandomized switching of the LEDs like in the link - a non lethal weapon a doctor may approve. 
http://hackaday.com/2009/09/28/open-source-weapon-makes-you-puke/
MAESTROaccelerometerrgb ledthrowing the ssd would result in a colorful representation of the forces on each axis

see the example "mpu2rgb" 

https://github.com/davedarko/mpu6050

THEREMINphotoresistorpiezo speakeralso known as a light theremin
N/Aaccelerometer
+
photoresistor
serial console3D scanning devise (probably very crude)
N/Afaderpiezo speakera trumpet or flute like instrument
N/AaccelerometerIR ledcontrolling IR helicopters and cars remotely
N/A
piezo speaker,
bar graph
metronome, using bargraph as binary display to show bpm / 10
N/A

accelerometer

piezo speaker

alarm triggered by movement

Towani Lifesign Wristdevice - Star Wars Ewoks | video update

2014-04-27 21:52:03


First things first - I can send data the way I want. Yay!

The bracelet is about 95% the same from the movie. It is missing those 4 dip switches, but is instead hard wired to channel 1 and I had to imrpovise about the leds. I don"t have a pulse sensor, but it would definately work as a prop the way it is right now.

As nothing ever is really done, I will get back to this after the contest.

Towani Lifesign Wristdevice - Star Wars Ewoks | chaos everywhere

2014-04-26 21:56:36

Today my printrbot simple broke down on me, the hotend won't heat anymore - so there will be only one wristband. Meh. And I don"t have the arduino pro minis yet nor the leds so I had to improvise on the wristband. So backup strategy now will be round leds, one wristband, fake data from 2 breadboarded arduinos. 

newer 3 / 4 older