start
echo: External Reset
Marlin
echo: Last Updated: 2015-12-01 12:00 | Author: (CR-10Slanguage)
Compiled: Apr 18 2018
echo: Free Memory: 1024 PlannerBufferBytes: 1232
echo:Hardcoded Default Settings Loaded
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z400.00 E93.00
echo:Maximum feedrates (mm/s):
echo: M203 X300.00 Y300.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X500 Y500 Z100 E5000
echo:Accelerations: P=printing, R=retract and T=travel
echo: M204 P500.00 R500.00 T1000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X5.00 Z0.40 E5.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:Material heatup parameters:
echo: M145 M0 H185 B0 F0
echo: M145 M1 H240 B0 F0
echo:PID settings:
echo: M301 P22.20 I1.08 D114.00 C100.00 L20
echo:Filament settings: Disabled
echo: M200 D3.00
echo: M200 D0
echo:SD card ok
Init power off infomation.
size:
591
init valid:
0
0
After activation of linear advance with .4 nozzle:
M900
Advance K=0.50